Scout rope machine-

By clemlaw , November 17, in Cub Scouts. I have fond memories of making rope as a Boy Scout, using a rope making machine that showed up about once a year or so. I recently went to a training and learned that the machine isn't really necessary. They taught us the method shown here:. I tweaked this a little bit for our Tigers and a good time was had by all.

Scout rope machine

Scout rope machine

Scout rope machine

These tools are not difficult to make nor are the materials expensive or hard to find. Both of these farm machines required the use of binder twine. Use a piece of scrap left over from making Scout rope machine handle. This is the final step see figure It worked best to spin it by City rhyming with een ine one hand to make an "O" around the string, and then using one finger of the other hand to spin the pencil. Or something totally unrelated to scouting? Figure It's easy! Then, cut the separator paddle Scout rope machine to the same shape as the handle see figure Peschke as presented in the printing of the edition of the Pioneering Merit Badge Pamphlet:.

Waxed porn. Description

Make the separator paddle. After cutting cleanup your teeth with sandpaper Scout rope machine your dremel tool sanding drum. Its fun to think of young hands cranking the Scout rope machine gears, watching them turn as they make rope for their projects. Rather than "whip" the rope, we just put a piece of masking tape tightly around the end. The Bear book also has an illustration of another improvised rope maker using a bench vise and a hand drill brace. You're done! Posted November 18, The top knob is shaped to prevent the yarns Scout rope machine slipping off. So I just used sticks on each end I actually used pencils. You will need basic woodworking sklls. Peschke as presented in the printing of the edition Allure amateur young the Pioneering Merit Badge Pamphlet: History of Rope Making — Making rope out of plant fibers is still done today in remote parts of the world.

The following text and diagrams are by Adolph E.

  • The following text and diagrams are by Adolph E.
  • Warm Greetings!

The following text and diagrams are by Adolph E. Peschke as presented in the printing of the edition of the Pioneering Merit Badge Pamphlet:. History of Rope Making — Making rope out of plant fibers is still done today in remote parts of the world. In many cases people make their own rope because money is in short supply and the native plants that have the needed fibers are in great abundance. As early as A. The technique can still be used today. Both of these farm machines required the use of binder twine.

Farmers soon realized that with the supply of binder twine they had for tying up bales of hay, they could easily make all the rope they needed at home by using a simple geared machine. These machines worked by turning a handle to twist the strands of binder twine into rope. The ropemaker also used a notched paddle to keep the strands from fouling and to regulate a uniform twist as the rope was forming.

Today you have to search the antiques shops for one, and if you find one, it might cost over a hundred dollars. Then, fast-moving machines were invented to simplify the task. Rope made from man-made fibers plastics comes in varying lengths on spools for ease in dispensing. It might be a bit impractical for your troop to make all the rope needed for camping or for your pioneering projects, but learning how to make rope will help you understand how yarns and strands are twisted to form rope.

The basic process of making rope consists of twisting fibers to form yarns. Then several yarns are twisted together to form strands. Finally, several strands are twisted to form the rope. Three of these binder twine yarns are twisted to form a single strand. The simple rope spinner shown in figure 71 is a replica of one used sometime around A.

With this spinner and fibers from cactus plants in that area, the Indians were able to make the rope they needed to construct shelters and for many other purposes. Making the spinner. Draw the basic shape of the spinner on the wood, following the pattern shown in figure Cut the basic shape with a coping saw.

This aids in spinning. The top knob is shaped to prevent the yarns from slipping off. Glue the handle dowel into the hole. Using the spinner. Loop the binder twine over the stick and then run it back to the head of the spinner. Now hold the spinner in front of you and face the other person. Spin the head of the spinner in a clockwise rotation. A little bit of practice will tell you how tight to spin the strand.

Spinning rope. Leave the strand on the spinner and hook. Grab the strand and loop it over the spinner and also loop it over the hook. Now spin the spinner in a counterclockwise rotation, as was done with the three yarns of binder twine.

This is opposite of the way for making the strand. As you spin, the three stands will twist to form a rope. Only practice will tell you how tight to twist the rope.

Then whip both ends of the rope and trim them. Another device that can be used to make rope is fashioned after the ropemaker used on farms during the early s. With it you can twist the three yarns on each hook into a strand, and the three strands into a rope all at the same time.

Make the device. Cut out the pieces. First, cut the handle A to shape as shown in figure Do not drill the holes yet.

Next, cut out pieces B and C. Glue and screw them together to form the base unit see figure Then, cut the separator paddle D to the same shape as the handle see figure Later, notches will be cut in the paddle see figure Mark holes in the handle. After these pieces are cut, you have to drill holes through the handle A and the upright part of the base unit C for the three tuning hooks.

Now mark the positions of the three holes for the turning hooks. Drill the holes. After marking the positions of the holes, hold the handle up to the upright piece on the base unit C.

See figure Make the hooks. These hooks are made from coat hangers. Then make two bends in the end of each wire to form an L-shaped end to fit in the handle. Now, insert the three turning hooks in the holes in the upright piece C of the base unit.

Make the separator paddle. The separator paddle is used to keep the strands separated while they are twisted into rope. To make the separator paddle, place the handle A on top of the paddle D and mark the position of the three holes on the paddle.

Then cut notches in the edges of the paddle at these locations. You can use a coping saw to cut out the notches see figures 74 and Make the end hook. This is the final step see figure Use a piece of scrap left over from making the handle. To use the ropemaker, first clamp the base unit to a table or a bench. Tie one end of the binder twine to one of the three turning hooks on the base unit. Now thread the binder twine to the end hook and back to each of the three turning hooks. As you begin, the Scout with the end hook should pull on his end to keep the slack out of the yarns.

Then ask a third Scout to insert the three strands in the notches of the separator paddle. Start near the Scout holding the end hook. As the rope is turned, the Scout holding the separator paddle should move the separator paddle towards the base unit, making sure that the strands do not become fouled. Start tuning the handle so that the hooks turn in a clockwise rotation.

As you turn the handle, the yarns binder twine will begin to form into twisted strands, and these strands will also twist to form into rope. The Scout operating the separator paddle should move it to prevent the strands from fouling. If the separator paddle is moved too fast towards the base unit, it will result ina loosely twisted rope.

Too few turns will produce rope that is loose. Too many turns will produce rope that is twisted too tight and might be hard to use.

Peschke as presented in the printing of the edition of the Pioneering Merit Badge Pamphlet: History of Rope Making — Making rope out of plant fibers is still done today in remote parts of the world. Figure 71 Making the spinner. Figure 72 Spinning rope. Figure 73 Cut out the pieces. Figure 74 — Double Schematic for handle A and separator paddle D. Figure 75 Make the hooks. Figure 76 Now, insert the three turning hooks in the holes in the upright piece C of the base unit.

Figure Post to Cancel.

If slabs are available, very attractive and sturdy stands can be made of slabs, or of logs. Check and change the oil. You will be sitting on the base. Keep that site handy. Thanks for reminding me of that experience Take your time and do this as precisely as possible Your finished Ring Gear should look like this. Mark holes in the handle.

Scout rope machine

Scout rope machine. Join our Crazy Adventure and get 10% off your first order

.

Surprisingly high-quality rope in a variety of sizes can be quickly and easily made with these simple tools and materials. These tools are not difficult to make nor are the materials expensive or hard to find. Download PDF file.

Clarke has worked with thousands of Scouts and Scouters as a director at his local Scout Camp Camp Horseshoe , and as a Scoutmaster for 30 years. He is the recipient of a number of awards recognizing his service to Scouting, including the B. He is author of the blog and podcast at Scoutmastercg. An avid outdoorsman and amateur actor, he lives in Kennett Square, Pennsylvania with his wife Teddi. Related Posts. Impressive Chart of Scouting Knots from Eight Knot Contest.

Amazing Pioneering Projects. Night Hike. Support the blog and podcast be a Scoutmastercg. Nothing on this website is an official publication of, nor bears the endorsement or sponsorship of any Scouting Organization. While we do our best to get things right the final word on policy and procedure is found in the resources produced by your Scouting organization.

Scout rope machine

Scout rope machine

Scout rope machine